Linear Stress˗Strain Model for Material Response

Key Concept: One model to represent the property of a given material response is to assume a linear relationship between stress and strain. The slope, E, for this model is the Modulus of Elasticity also

called Young's Modulus. See the figure below.

In a Nut Shell: The equation relating stress and strain for the linear model is as follows:

σ = E ε

where σ is the normal stress (lb/in², mPa, N/mm²)

ε is the normal strain (in/in, mm/mm, microstrain)

E is the Modulus of Elasticity (a material property ˗ psi, MPa)

Material	Value of Modulus of Elasticity, E
Mild Steel	29 x 10^6 psi	400 MPa
Aluminum	10.5 x 10^6 psi	100 MPa

Return to Notes on Solid Mechanics

Copyright © 2019 Richard C. Coddington
All rights reserved.